With two of its own PCB plants in Russia, Rezonit is a rapidly expanding private corporation and one of the market leaders in the electronic sector.Rezonit was founded in 1997 as a PCB trade business with just 3 people. Today, Rezonit is a PCB manufacturer with over 900 employees that operate in offices and production facilities.PCB manufacturing (prototype through mass production)

Contract manufacture of electronics and PCBA production

Creating stencils

We continue to invest in the most cutting-edge hardware and software in order to meet the needs of our customers. Our annual production capacity is more than 40.000 m2 of goods.

We have created branches in Saint Petersburg and Ekaterinburg as well as representative offices in Voronezh, Kazan, Krasnodar, Nizhny Novgorod, Rostov-na-Dony, Perm, Saratov, and Ufa in order to better serve our customers throughout all of Russia.

In Russia, a PCB technology company specialises in producing printed circuit boards quickly. Orders can be placed online, in person at our offices in Moscow and St. Petersburg, or both. Since a printed circuit board is the foundation of every electronic device and is relatively inexpensive (it costs an order of magnitude less than the electronic components installed on it), product quality should always come first when ordering printed circuit boards used in critical areas of electronics (instrument engineering, telecommunications, industrial automation, and the Internet). Saving on printed circuit boards is strongly discouraged because it may have fatal repercussions. The quality of the items is therefore our top priority.

Our ability to offer full-cycle contract manufacturing is one of our primary advantages. From the initial idea through the post-warranty support, "MicroEM Technologies" offers a broad range of services for the development of electronic devices.

Features of printed circuit board mounting

superior PCB assembly

In addition to installing printed circuit boards using equipment provided by the customer, "MicroEM Technologies" can also create and supply printed circuit boards on its own, as well as buy components and soldering supplies on its own for order fulfilment.

We are able to choose the best equipment combination for the customer's needs because to our extensive knowledge, solid supplier contacts, and highly skilled personnel.

One of the biggest EMS providers in Russia is A-CONTRACT. A-CONTRACT is ranked third among the top 5 Russian EMS firms by Tadviser (2020).a wealth of knowledge. The largest EMS provider in Russia, A-CONTRACT, has a long history and employs over 250 highly qualified and specialised personnel.

Convenient method of operation. We offer a comprehensive variety of EMS services, including PCB design and fabrication, SMT assembly, and PCBA box building.

technology today. We regularly upgrade our hardware to guarantee that our technologies adhere to all applicable rules and regulations for PCB assembly and production.

The best production quality is guaranteed by our multi-stage control system.

Over the past 20 years, very dependable household electronics for demanding applications have been developed and produced. strict adherence to the established quality management system when creating, releasing documentation, and choosing the technology used in production.

One of the biggest production facilities in the Kaliningrad region is Joint Stock Company "Quartz". A leader in the research and production of technologically challenging electronic, hoover and other equipment, this company has been in business for 50 years.

Several branch institutions and businesses of the electrical, defence, and space industries are among the customers of our products. More than 20 nations, including the USA, Canada, South Korea, and China, import JSC "Quartz" products.

JSC "Quartz"'s primary activity is the development of specialised vacuum-processing machinery for magnetron, thermal, ion-beam, electron-beam, and epitaxial layer growth as well as plasma-chemical etching and deposition for:

Electronics production on short notice is our area of expertise. timely fabrication of printed circuit boards, rapid assembly of your goods, and urgent installation of printed circuit boards (average installation time: 1 week). We can complete even the most complex installations, including the installation of unique and highly reliable products, in the shortest amount of time thanks to our thoughtful online service, collected experience, experienced staff, and current equipment. We can assemble both a single item (one printed circuit board is the minimum order size) and a sizable batch. The assembling of printed circuit boards will be done manually, on a manipulator, or on an automation manufacturing line.

1995 saw the founding of MELT. At that time, the primary business was the creation, production, and marketing of AON (automatic number identification) boards, which were in high demand. We have developed a production culture that enables us to be one of the most technologically advanced Russian electronics manufacturing companies today thanks to this direction, which also allowed us to purchase cutting-edge assembly and measuring equipment.

The TECHNOTECH company, which is a member of the VLV industrial group, was founded on the foundation of a printed circuit board manufacturing branch enterprise with approximately 50 years of experience. The ability to successfully master and use contemporary technological solutions, along with ongoing process modernization and optimisation, enable the production of printed circuit boards with a sixth accuracy class.

From the printing of printed circuit boards until the release of an electronic assembly, we offer a comprehensive range of services.

Printed circuit board manufacturing facility ELECTROconnect

Novosibirsk Established in 1991, Plant of Printed Circuit Boards "ELECTROconnect" is one of the largest enterprises in Russia with a focus on the urgent and mass manufacture of printed circuit boards. With a production capacity of up to 30,000 m2 of printed circuit boards annually, more than 6,000 m2 of production space, over 12,000 customers from Minsk to Vladivostok, modern equipment, constant modernization and re-equipment of production, and quality control systems ISO 9001, GOST RV 15.002, GOST, and IPC, ELECTROconnect is currently.

From one piece to frequent huge series, we make printed circuit boards for our customers in any quantities.

Regarding Di-Electric

A youthful group of professionals with more than ten years of experience in the manufacture of electronic devices made the decision to join forces under the name "Di-Electric" in order to develop a cutting-edge strategy for the use of printed circuit boards. Due to the automatic cost calculation and delivery of the order to your door, we were able to obtain costs that are reasonable for you while also saving time.

"Qualified engineers plus cutting-edge software" is our formula for efficiency.

We are also prepared to go over all the specifics of placing an online order. There is a direct phone for this, +7 (495) 641 95 19, as well as a feedback form here.

We are a startup firm called Elnux, JSC that specialises in Embedded Systems thanks to our many years of electronics experience. We had faith in and confidence in our ability to provide solutions using our many years of experience to ensure long- and short-term consumer pleasure.

System on Modules, single board computers, GSM remote controllers, and low power embedded devices are among the specialties of Elnux, JSC, which also specialises in original design production. Without the assistance of a third party, our R&D and manufacturing capabilities enable us to quickly manufacture products that are tailored to the needs of individual clients or that we have designed ourselves.

To use our experience of the industry to manage all PCB requirements with effective, affordable, and high-quality solutions that meet customer requirements and expectations.

Litho Circuits has received ISO 9001:2008 accreditation from NQA. All of our suppliers have received accreditation to international standards such as Mil-PRF 55110, TS-16949 (QS9000), Universal Laboratories (UL 796), and ISO9001, ISO14001, among others.

Beta LAYOUT – Your specialist in PCB prototype manufacturing and assembly

Thanks to various and cutting-edge industrial processes, Delta Neo is able to produce all forms of high-tech metal connections and shafts from round, square, or rectangular wires with a minimum section of 0.2 mm, based on customer plans.

We completely understand the needs of the customer to have a quick turnaround time, on-time delivery, and the best price possible without compromising the reliability of the product because we have an average experience of more than 31 years in the cable assembly sector. We are capable of producing modest to medium-sized builds and managing domestic and international prototyping. For our clients, we are experts in ensuring a smooth transition from modest to high volume, offshore production.

Connector (M) E.U. Sdn. Bhd. (EU) was founded in 1993 and is a Malaysian company based in Kulim, Kedah Darul Aman. The company's operations as a maker of wire harnesses include the production of wires, cables, assemblies, and harnesses for lighting and electricity, data transmission, and sound transmission. EU has diversified from consumer goods to include the production of goods for industrial and automotive uses.

EU Management is dedicated to producing items of the highest caliber and exceeding customers' expectations. EU manufacturing operations have consistently been exposed to rigorous international standards certification tests and audits in this effort. Major manufacturers of Japanese and American products are currently among the EU's clients and partners thanks to their 20+ years of experience and worldwide quality & process certifications.

Custom circuits are available through EU Research & Development services.

A vibrant and quickly expanding technology business, Sapura Thales Electronic (STE) focuses on the creation and production of Defense Communications Technologies. a partnership between the French main firm Thales and the Malaysian conglomerate Sapura.

Our business was founded in 1990 with the goal of producing premium wire harness for OEMs and distributors. We are a top producer of wire harnesses for automobiles. We produce a variety of goods, including starter kits, terminal clips, fusible links, battery boosters, bulb holders, headlamp kits, power window wire sets, solenoid contacts, and starter kits.

In particular, we also cover the car industry's aftermarket. We also focus on auto electrical components. We always have ready supplies to meet customers' impromptu needs. In this industry, our brands like Hong Xuan and Car exhibitions are well-known.

Additionally, our business supplies goods to a number of automakers, including Proton and Toyota Malaysia. We have a long-standing relationship with the OE Manufacturer.

In Malaysia, Aval Electric Sdn Bhd was founded in 1989. AVAL has earned a stellar reputation as a manufacturer of high-quality wire harness and FFC products throughout the years. Automotive, home appliance, and audio video products are all included in our assembly product lines.

In addition to offering our customers cutting-edge technological items like FFC Gold Plating and component solutions, we aim to provide outstanding customer service as one of the local leading wire harness manufacturers.

As promised, we'll keep delivering goods and services based on evolving technologies that offer top-notch customer service, superior quality, safety, dependability, and eco-friendly materials. Total customer satisfaction is our guiding principle and our steadfast commitment.

To make things easier for you in terms of business, we spread our