To suit your demands, we produce a variety of molds:

Molds for Aluminum Prototypes

Steel Model Molds

Pre-Hardened Molds

Cast Iron Molds for Production

Molds with a single cavity

Molds with Multiple Cavities

Over-Shapes

Turning Molds

Rubber Molds

Cast Molds

M.G.R. Mold Inc. has been a family-run business since 1980, providing injection molding, prototype, and production run services to a variety of sectors.

Blue Ridge Industries started off as an assembler and specialty injection molder of plastic parts in 1985. With presses weighing between 100 and 950 tons, BRI improved and grew its injection molding capabilities throughout time. To better serve our clients, we have expanded our offerings beyond molding. Rapid prototyping, a wide range of assembly options, and end-user fulfillment are all provided by BRI.

Our facilities grew along with the company. In 1989, we relocated to the present location. The 25,000 sq. The facility's size was increased to 75,000 sq. ft. in 1994. BRI now has almost 100,000 square feet. warehousing and manufacturing space of feet.

In addition to offering top-notch customer service, BRI's advantageous location helps it succeed. Accessed via I-81 in

We are hardworking Americans who have a deep dedication to the tenacious work ethic, meticulous attention to detail, and can-do spirit that helped to create this nation.  Our plant, which is in Northern Virginia, has the cutting-edge tools, know-how, and mindset needed to competitively design and produce products here in the country.

Our objective is to provide services, components, and solutions to our clients at a faster rate, to a higher level, and at a cheaper cost. We are engineers with a passion for producing parts, products, tools, and systems.  For a range of industries and project sizes, we provide the best quality in product development, machining, fabrication, and metrology.

We got our start in 1949 as Plastic Products Corporation, a little business that produced hearing aid cables.

‍

We changed course in 1987, changed our name to Plastics One Inc., and relocated to the Southwest County of Roanoke, Virginia, where we are now. We directly collaborate with OEMs worldwide to produce injection-molded goods and connecting cables used in the medical sector. Our target market hasn't changed, but our additive manufacturing focus has grown and allowed us to continue to develop our customer base. All departments are housed in this large facility under one roof, including R&D, Engineering, Toolroom, Production, Sales, Customer Service, Procurement, Accounting, and Marketing, who collaborate to provide the best service possible to our clients.

‍

Since 2001, when we switched to employee ownership, our

Henry Beck, the founder of Tessy Plastics, was born in Germany, and at the age of 14, he began an apprenticeship as a toolmaker. He stayed with the same employer after graduating in 1953 for another two years before accepting a job teaching clients how to run tool-making machines in Brazil in 1955. Henry was keen to travel the world and accepted the assignment. After spending two years in Brazil, Henry moved to the United States and began working as a service engineer for the country's largest importer, installing and instructing at businesses for 20 years, including NASA.

Henry founded the Beck Machinery Inc. in 1968 in Skaneateles, New York, and supplied Swiss-made automatic screw machines to renowned business Welch Allyn. Welch Allyn urged Henry to launch an injection molding business based on their mutual confidence and trust.

Tessy

Henry Beck, the founder of Tessy Plastics, was born in Germany, and at the age of 14, he began an apprenticeship as a toolmaker. He stayed with the same employer after graduating in 1953 for another two years before accepting a job teaching clients how to run tool-making machines in Brazil in 1955. Henry was keen to travel the world and accepted the assignment. After spending two years in Brazil, Henry moved to the United States and began working as a service engineer for the country's largest importer, installing and instructing at businesses for 20 years, including NASA.

Henry founded the Beck Machinery Inc. in 1968 in Skaneateles, New York, and supplied Swiss-made automatic screw machines to renowned business Welch Allyn. Welch Allyn urged Henry to launch an injection molding business based on their mutual confidence and trust.

Tessy

Since 1977, Trident Plastics Inc. has been supplying industry with quality materials, competitive prices, and an unsurpassed level of service.  Our first priority is to serve our customers.  Our entire organization strives for excellence and takes pride in our ability to offer cost-effective solutions to your plastic needs. Our experienced sales representatives can provide technical assistance with all aspects of processing plastic shapes as well as application assistance with material property data, chemical resistance and regulatory standards.

Trident’s enormous inventory of sheets, rods, tubes, films, shapes and resins are ready for immediate shipment from multiple locations across North America.

Trident is currently in the process of implementing ISO 9001:2008 Quality Management Principles.

Modern Alpha Plastics, Inc. is a custom injection molding company with manufacturing facilities and offices located at 7200 NE Birmingham Road, Kansas City, Missouri 64161.  The current company was established in 1996 by merging two independent companies, Modern Plastics Molding, Inc. from Independence, Missouri (purchased in 1989) and Alpha Plastics, Inc. from Kansas City, Missouri (purchased in 1991).  At the time of their merger, these two independent companies had been in continuous business operation for 31 and 27 years respectively with combined annual sales of approximately $7 million and had been responsible for providing outstanding custom injection molding. Our company continues to provide this level of excellence and is recognized in its markets for high quality standards and its ability to manufacture and assemble the difficult dimensional plastic parts that are required to meet our customer's specifications.

W-L Molding of Michigan, LLC (formerly known as W-L Molding) was founded in 1945, and subsequently purchased by our current ownership in 2013. We are privately held, and nationally certified as a minority supplier by the Michigan Supplier Development Council.

We have an excellent team, who is exceptional in communicating with our customers. We welcome, and encourage, our customers to call any member of our team; no question or problem is too small or insignificant. We pride ourselves in giving our customers the utmost, expeditious attention and extraordinary service they deserve.

We have invested in capital equipment and software systems across numerous AM technologies since our foundation in 2012 in order to be diverse, balanced, and in a position to surpass our clients' expectations.

In order to offer our clients the most up-to-date and well-fitting additive manufacturing (AM) solutions, 3D Parts has carefully partnered with the top suppliers of AM technology in the market.

For over 20 years TK Mold & Engineering, Inc. has specialized in Plastic Injection Molds. We have the ability to design and build your prototype or production mold to fit any of your manufacturing needs. 

Established in 2003, TK Mold & Engineering, Inc. is located in Romeo, Michigan. A building expansion was added in 2017 to accommodate recent investments in machinery. TK Mold focuses on modern training techniques to keep us in a position for continuous growth and a competitive edge. 

The Spiratex Company has been a leader in custom plastic extrusion. We pioneered the extrusion process for Ultra High Weight Molecular Polyethylene (UHMW/PE), setting industry standards that are used in markets around the world.

We have both ram extrusion and screw extrusion capabilities, allowing us to design and extrude your tubing or profile with virtually any thermoplastic polymer. As a company that has partnered with various material suppliers to develop and test new extrusion-grade resins, we know exactly how materials will perform. Let us put our expertise to work for you.

Premier Industries US is an American company headquartered in Las Vegas, NV.   On a nationwide basis, we deliver High-Quality Plastic Injection Molds, Progressive Stamping Dies and Customized Parts Production at low-overhead costs to you.

We have qualified numerous shops from several regions in China that can produce your tooling and/or production requirements quickly, accurately and at extremely competitive prices.