Regarding Di-Electric

A youthful group of professionals with more than ten years of experience in the manufacture of electronic devices made the decision to join forces under the name "Di-Electric" in order to develop a cutting-edge strategy for the use of printed circuit boards. Due to the automatic cost calculation and delivery of the order to your door, we were able to obtain costs that are reasonable for you while also saving time.

"Qualified engineers plus cutting-edge software" is our formula for efficiency.

We are also prepared to go over all the specifics of placing an online order. There is a direct phone for this, +7 (495) 641 95 19, as well as a feedback form here.

For more than 20 years, we, a highly specialized company in mechanical metalworking, have provided mechanical and plant engineering with on-time, order-related individual part and series production.

Welded structures, turned and machined parts, ready-to-assemble assemblies, as well as development and CAD design, are all part of our service offering.

From the Allgäu region, Brutscher Maschinenbau provides precision work. We have extensive experience with complex components. From individual parts to serial production, our skilled staff develops customized solutions with unwavering knowledge and a focused client orientation that are all created in Germany.

Precision components are necessary for mechanical and plant engineering with high performance. This is where Brutscher Maschinenbau GmbH of Sonthofen in the Allgäu area finds its power and enthusiasm. Since 2011, our skilled and knowledgeable team has been creating, designing, and putting together customer-specific solutions for all industrial sectors. Our staff gets to work when downtime is a possibility and systems urgently need acceptable components. Because we are aware of the high cost of downtime in business.

Even for more complicated projects, we place a high value on trustworthy, all-encompassing concepts of the highest caliber.

We are a startup firm called Elnux, JSC that specialises in Embedded Systems thanks to our many years of electronics experience. We had faith in and confidence in our ability to provide solutions using our many years of experience to ensure long- and short-term consumer pleasure.

System on Modules, single board computers, GSM remote controllers, and low power embedded devices are among the specialties of Elnux, JSC, which also specialises in original design production. Without the assistance of a third party, our R&D and manufacturing capabilities enable us to quickly manufacture products that are tailored to the needs of individual clients or that we have designed ourselves.

To use our experience of the industry to manage all PCB requirements with effective, affordable, and high-quality solutions that meet customer requirements and expectations.

Litho Circuits has received ISO 9001:2008 accreditation from NQA. All of our suppliers have received accreditation to international standards such as Mil-PRF 55110, TS-16949 (QS9000), Universal Laboratories (UL 796), and ISO9001, ISO14001, among others.

Munich-based Spanflug Technologies GmbH is a technology business that runs a platform for producing CNC-turned and milled parts. We want to create the digital backbone of a productively networked manufacturing sector by making it as quick and simple as possible for customers and suppliers to produce individual drawing elements.

Okartek is a well-known Finnish contract manufacturer in the plastics industry with nearly 40 years of experience at the forefront of contract manufacturing. From design to delivery, our production offers a comprehensive service. The two primary categories of production techniques are injection moulding and thermoforming. An effective assembly line, useful storage, a 3D scanning service, and 3D printing (rapid prototypes and small-run production) all enable production.

Contract maker of steel and plastic injection-molded parts is Plastoco Oy. Since 1980, the Porvoo family firm has been a player in the plastics and injection moulding sectors. We actively engage in the growth of our MIM production in addition to plastic production.

Plastoco hopes to assure its clients of the dependability and adaptability of projects using its experience. We make high-quality investments and think it's crucial to honour scheduled delivery dates.

Neeraj Exim Enterprises was established in Baroda in 2001 with the goal of producing and exporting engineering goods. The provision of the highest possible grade of sheet metal and CNC-machined components was the main focus. We have engineers with extensive experience in these sectors working with highly qualified technical employees.

We have created more than 3000 different metallic and non-metallic component variants over the past 20 years of manufacture for a variety of sectors. With the design and drawings of the customer, we also build items and machinery. Over the past several years, we have continually provided our distinguished customers with repeat business.

Established in 1994, Vector Atlantic Sdn Bhd provides manufacturing services in Nilai as well as trading (supply of direct materials for the automotive industries).

Our core business is full precision metal stamping for the automotive, computer parts, electrical, and electronic industries. This includes conceptual design, mechanical analysis, tooling, fabrication, production, and assembly processes.

​

As we have grown over the years, we are now AJA Registrars, certified to ISO 9001:2015 and ISO 14001:2015, and we service multinational global automakers as well as multinational electronic MNCs.

​

Changes must occur

​

We have expanded our expertise throughout the years to take advantage of opportunities and growth in other industries.

​

Today, we expanded our manufacturing to include services and repairs for glove dipping lines and former holders.

Additionally, we assist in research and development for automation in addition to providing restoration, parts replacement, or reconditioning.

SEMS Sdn Bhd is a reputable engineering company with offices in Balakong, Selangor, Malaysia. It specializes in the design and production of heat sinks and other metal-stamped components for the electrical and automotive industries.

When we first began doing business in 1997, manufacturing metal stampings, tool design, and tool fabrication were our main priorities. From 5 employees when we originally started, our company has expanded to include more than 20 engineering specialists.

As demand for our heat sink production grew, we began using the progressive stamping technique in 1999.

Our business has expertise in a variety of production processes. We began to invest more in automated production techniques at the beginning of the 2000s. We introduced automated pin manufacture to increase our production capacity.

Result Quality Sdn. Bhd. was established as a private limited corporation on March 19, 1992. The company's main commercial activities include the production and selling of products made of injection-molded plastic as well as other ventures involving plastic.

Mr. Goh Tiong Hwee, the company's creator, chose the name QUALITY RESULT, which stands for high-quality goods. He has more than 30 years of technical experience in the plastic industries. The founder accumulated a lot of company management experience.

Quality Result specializes in the manufacture of precise parts for the automobile industry as well as calculators, hand labelers, shower sets, water heaters, audio, video, and remote controls. These plastic components that were molded and that we provided to our clients were being shipped.

Trisen Manufacturing Sdn Bhd, a Malaysian company founded in Kuala Lumpur in 1988, specializes in the precision plastic injection moulding of high-quality parts for electrical & electronic equipment and internal aesthetic components for automobiles. We are attempting to manufacture complicated and precise engineering plastics for use in a variety of industries.

We are one of the top producers of plastic components in Malaysia, offering services for tool design and fabrication, precision injection molding, and secondary operations like UV coating, decorative paint coating, printing, hot-stamping, and subassembly of plastic electronic and mechanical parts.

Trisen received ISO 9001:2000 accreditation from RWTUV in 2002 and ISO 14001 accreditation from Moody International Certification in 2008. In addition to these, we have IATF 16949-2016 factory accreditation.

Industry SPEN Sdn. Bhd. Having clamping force capacities ranging from 60 tons to 320 tons for the automotive, machine components, electrical, lighting, and vending machine industries. Specializing in precision reinforced engineering plastic, insert and parting-line injection molding and mold production.

We completely understand the needs of the customer to have a quick turnaround time, on-time delivery, and the best price possible without compromising the reliability of the product because we have an average experience of more than 31 years in the cable assembly sector. We are capable of producing modest to medium-sized builds and managing domestic and international prototyping. For our clients, we are experts in ensuring a smooth transition from modest to high volume, offshore production.

Connector (M) E.U. Sdn. Bhd. (EU) was founded in 1993 and is a Malaysian company based in Kulim, Kedah Darul Aman. The company's operations as a maker of wire harnesses include the production of wires, cables, assemblies, and harnesses for lighting and electricity, data transmission, and sound transmission. EU has diversified from consumer goods to include the production of goods for industrial and automotive uses.

EU Management is dedicated to producing items of the highest caliber and exceeding customers' expectations. EU manufacturing operations have consistently been exposed to rigorous international standards certification tests and audits in this effort. Major manufacturers of Japanese and American products are currently among the EU's clients and partners thanks to their 20+ years of experience and worldwide quality & process certifications.

Custom circuits are available through EU Research & Development services.

The headquarters of IWE components Sdn Bhd are in Puchong, Selangor, Malaysia. Various types of electronic components, electrical goods and accessories, computer goods and services, PCB assembly, and wire harnesses are the current areas of our business.

The majority of our components are either purchased from domestic firms or trustworthy, quality-controlled sources outside. It is possible to guarantee that your equipment is put back into operation as quickly as possible, preventing lost revenue and protecting your assets and business, by having access to the appropriate spare parts at the appropriate time.

Resistors, Capacitors, Diodes, LEDs, Transistors, Connectors, Battery & Charges, Semiconductors, Switch and Relays, Computer Data Cable, Transformers, LED lights, CCTVs, testing equipment, and many more are among the active and passive items that we stock. All are welcomed.

Since its inception more than 30 years ago, Trans Wong Sdn Bhd has focused primarily on the trading of electrical components. Trans Wong's headquarters are currently located in Kuala Lumpur's KL Industrial Park. Additionally, it has divided its operations into three main business segments: sourcing, manufacturing, and distribution & retail. Currently, Trans Wong carries more over a million electronic components, all of which are kept in stock in their 10,000 square foot warehouse.

Just so you know, every piece of equipment carries some sort of risk. While dangers can be reduced by selecting high-quality items and carrying out routine maintenance, they can never be completely eliminated. Having quick access to the appropriate replacement components can help you

A family-run business with its headquarters in Auckland is CNC Machining Co. We are a competitive company in the engineering industry with years of experience manufacturing machined components.

With 34 employees and 16 CNC machines currently in operation, we have steadily expanded over the years. Since we created our own internal production planning system, we are confident that we can effectively manage every area of our clients' needs. For all of our workforce, we have implemented both internal and external training techniques as a result of our commitment to investing in the future.

Since technical advancements are paving the way for greater tooling capabilities, 5-axis machining, autonomous processes, and more productivity, the future of CNC machining is filled with promising opportunities.

We are a high-performing team at Cubed3 with a primary focus on engineering innovation for businesses in New Zealand and around the world.  Designers, project managers, CNC machine operators, and assistants make up our team.