One-stop turnkey electronics manufacturing services are our area of expertise. We can assist you with all aspects of electronic manufacturing, including prototype development, pre-production, mass production, and value-added assembly. By outsourcing your needs to us, whether it be a consigned or turnkey task, we give you a competitive advantage and a higher chance of profitability.

All electrical devices must have the "Shortest Time to Market at Most Affordable Price" to be successful. You can reach this objective through reliance. We construct every prototype in the shortest amount of time and for the lowest cost.

All PCB assemblies are completed at our facilities in Totowa, New Jersey. We have worked with top-tier offshore Electronics Contract Manufacturing Service providers for very large volume production. You have a choice,  

For both wafer sort and final test applications, we at R&D Altanova are experts in providing cutting-edge test interface solutions. Our solutions include comprehensive component and mechanical assembly, sophisticated fabrication capabilities (probe cards, load board PCBs, and MLO substrates), advanced in-house design and simulation (SI/PI), and advanced fabrication capabilities.

Many of the biggest integrated device manufacturers, fabless semiconductor businesses, and semiconductor foundries rely on R&D Altanova as their primary source for complete turn-key test interface solutions.

Burn-in boards, probe cards with coplanarity requirements as low as 12 m, fine pitch load boards with manufacturing down to 0.2 mm, embedded component solutions for printed circuit boards, and daughter cards are just a few examples of cutting-edge technology solutions for the ATE industry.

R&D Altanova employs a variety of exclusive technologies and procedures to 

Since 1985, Quality One has been a proud participant in the electronics sector. Our business has proven its expertise and professionalism in the PCB industry. We at Quality One would like to provide you with a range of goods and services. Our areas of expertise include designing printed circuit boards. Your naked printed circuit boards can be made in a variety of ways, including metal-core, rigid, rigid-flex, flexible, and paper. Quality One works with a wide range of international manufacturers. We showcase international manufacturers who adhere to RoHS, as well as ISO 9000, ISO 9002, QS 9000, UL Approval, and MIL-P-55110 and MIL-P-50884. Additionally, we offer assembly of your PCB prototypes, low, medium, and high volume goods here in the United States, or if you prefer offshore locations, we offer assembled products. 

Quality Circuit Assembly has been delivering electronic contract manufacturing solutions through strategic business alliances to its clients since 1988. The foundation of outsourcing is this relationship, which, once created, promotes effectiveness, cost savings, and ongoing process improvement.

Our skills cover a wide range of expertise, starting with your prototypes and extending to ongoing production of an entire product or assembly. Each customer's unique needs are taken into account when designing turnkey solutions.

QCA is ideally situated near the San Jose airport and all main carriers in San Jose, California. Its main objective is to supply market-leading businesses in the industrial, scientific, instrumentation, military, medical, and green economies with contract manufacturing solutions.

 Since its modest beginnings in 1998, when company had just 2 employees and a rented 1,700 square foot space, Q-Flex has consistently aimed to achieve the same goal: to offer the best service for the most challenging flex circuits at a reasonable price. Q-Flex now has 18 devoted employees on staff, all of which are highly qualified and trained. Currently, Q-Flex is operated out of a 7,000 square foot facility that was specially created for the company. American-made, long-lasting flex circuitry. Our reputation is at stake. We transport our goods all over the world.

We have taken an active role in promoting recycling and green technologies in the neighbourhood. In keeping with this promise,  

Protoline, Inc., which was founded in 1987, is the biggest circuit board manufacturer in the Houston, Texas, region, producing up to 20 layer boards. Our cutting-edge 20,000-square-foot facility, which is expanding, has the capacity to produce more than 1,000 18′′x24′′ PWB or PCB panels every day. The business has the following certifications: ISO 9001-2008, UL, ITAR, and Minority Owned Business.We are capable of completing all of your design, fabrication, and assembly requirements. We have provided services to a variety of industries over the past 31 years, including contract manufacturing, oil and gas, communications, medical, data processing, recorders, controllers, audio, video, and aerospace.

We specialise in orders for prototypes and medium-volume production. Our premium quick turn service has a turnaround time of 1 to 10 days. Completed in 1999, our new building,  

Privately held company, formed in 1968, Pro-Tech was acquired by woman-owned American Circuit Corporation in October 2018. It has 83 employees and a 30,000 square foot building that can be expanded to 60,000 square feet.

An 8(a) SDB Company with AS9100D & ISO 9001:2015 certification is Printed Circuits Corp. (PCC Services). In Lilburn (Atlanta), Georgia, PCC has a 32,000 square foot structure with a fully functional plant. We are a top provider of EMS and PCB assembly services, and we have many years of experience in the sector.

PCC was founded in January 2000 and has experience in both printed circuit board design and production. In less than two years, we expanded and increased our clientele by adding Circuit Card Assembly services in an effort to become a full-service EMS supplier.

Quick turnaround is a PCC speciality for both production and prototypes. Our knowledgeable and experienced engineers guarantee delivery with no defects. To satisfy the strict PCBA specifications of today, we regularly enhance our production capabilities.

Located in central upstate New York, Standard Printed Circuits, Inc. is an independent producer of rigid printed circuit boards. SPC is a manufacturing company with a 15,000 square foot space that has been in existence since 1967. Our present leadership team has been working together for a long time; they have an average tenure of 19 years and a combined experience of 168 years.

The breadth of SPC's capabilities enables us to handle both our clients' requests for prototype and/or experimental boards and those that develop into full-fledged production runs. Prototype and medium-volume production runs are both within the scope of our general capabilities, with a focus on quick turn delivery.

Technology organizations all across the world can get engineering services from SunMan Engineering.

converting ideas into usable designs

Product Creation

Conceptual Design

Production of prototypes

Designs for reference boards

Production of the reference board

Design of Printed Circuit Boards

Visit our Services section to learn more about our experience. It provides information about our capabilities for product development, prototyping, product architecture, software, and firmware development. Our contributions to cutting-edge technology are highlighted on our IP Portfolio page. You can find our patents as well as the technology and goods we've created in collaboration with our clients there.

We are prepared to handle concerns early in the concept stage and throughout the product development cycle in order to save time, effort, and money when a final product is developed since our project goals are always oriented on generating a finished product. in the end

As an EMS supplier, our main goal is to serve as a collaborative partner who will produce items with the same level of care and precision that went into the designs. The primary problem we hear about in our sector is how inconsistent quality control is becoming. Even our most recent connections with industry startups have seen how much time employees spend on rework. This has a significant impact on their capacity to introduce trustworthy items that have already undergone rigorous testing and proven to be effective.

The harsh manufacturing conditions and high quantities required by owners looking to boost profitability are indeed a typical problem for some in our sector. In this respect, Surface Art is different. where most businesses emphasize low

Surmotech, a women-owned small business and full-service electronic contract manufacturer, is based in Victor, New York. Since 1991, we have offered a full spectrum of manufacturing, assembly, and test services to the consumer market as well as to the military, medical, industrial, optical, and aerospace industries.

You may control an internal production department with Surmotech as your manufacturing partner without having to worry about the associated costs. Our team of professionals is fully committed to exceeding your expectations and providing the best goods and services possible, including the following:

Assembly of printed circuit boards

Services for Electromechanical Assembly

Electronic Evaluation

Our campus is ideally close to both the Rochester International Airport and downtown Rochester, where our committed team is waiting to assist you.

We offer circuit board assembly services based on ISO 9001 and ISO 13485 Medical Quality System, ranging from quick-turn PCB prototypes to same-day PCB assembly services. 

With the following industry-recognized certifications and registrations, we offer comprehensive PCB assembly services from the initial design to the final commercialization.

"We partnered with Telan 11 years ago (2009) when we decided to move our PCB assembly back on shore and close to our headquarters. After evaluating several houses to do our work, we decided on Telan based on their high performing experience, their investment in business equipment, but most importantly because of their staff's expertise. CJ, Shawn, and George are the heart of their operation, staying on top of all our needs. Our business could not have grown as i have."

Texas Circuitry has established a strong reputation for

offering a comprehensive selection of technology and top-notch customer support

and high-quality goods.

Our engineers appreciate working with yours to create high-quality goods.

that satisfy your present requirements and our cutting-edge, 30,000

UL-approved, 20,000 square foot facility ensures our ability to satisfy

your deadlines for scheduling.

The ECM Group, which was established in 2002, is well-positioned to offer customers the complete range of cost-effective production and sourcing services for PCBs, Wire Harnesses, Cable Assemblies, Precision Formed Metals, Batteries, LCD/LCMs, and Plastics. With offices in the USA, Canada, Mexico, Europe, and Southeast Asia, we mix manufacturing from Southeast Asia, China, and Taiwan. All across the world, our products can be found in high-end and commercial computers, communications systems, avionics, cars, camera/camcorders, white goods, industrial controllers, and medical equipment.

Transline Technology has spent more than three decades specializing in collaborating with creative design engineers that routinely push the limits of RF, Microwave, and mmWave PCB technology.

Since its founding in 1985, TRC Circuits, Inc. has earned a reputation as one of the top producers of printed circuit boards.  A new era began in 2002 when Melanie Bera bought TRC Circuits.  The production equipment has undergone significant updates since the 2002 purchase, including the addition of a Mania Loc8 Flying Probe Tester and a Mania Prism Photo Plotter Front-end.  In order to meet the industry demand for higher quality products at lower rates, there have also been significant staff changes.  With more than 20 years of engineering experience, TRC offers new engineering, testing, and photo plotting services.  

One of the top manufacturers of printed circuit boards in the US, Twisted Traces provides unrivaled advantages in terms of quality, affordability, and on-time delivery. Our 30 years of PCB manufacturing experience, as a printed circuit board manufacturer at the forefront of innovation, is essential to making your ideas a reality.

There are many low-quality, unreliable off-shore items on the market for printed circuit boards nowadays, which can be a waste of time and money. Twisted Traces' mission is to revive the "Made in USA" movement in the PCB manufacturing sector by providing US-made goods at pricing competitive with those found overseas.

If you need low-, medium-, or high-volume PCB fabrication, get in touch with us right now. Our team offers prompt, attentive service.

Custom electronics and electro-mechanical product design, engineering, and manufacturing are the areas of expertise of UMC Global Inc, which started operations in 1998.

With projects that we handle from the Concept level through Design, Development, Prototypes, NPI, and Production, we offer comprehensive product design services. With the help of our services, customers can seamlessly transition through the Design, Prototype, and Production phases. Within the Electronic Manufacturing Services (EMS) sector, our vertically integrated structure of design through product manufacturing is a rare mix.

Our corporate headquarters, design/engineering offices, and operations in Hong Kong and Malaysia are all located in Seattle, Washington. Our Guangdong China site handles high volume production, while our Seattle manufacturing facility specializes in NPI quick prototyping and small to medium level production.

Our clientele ranges from start-up businesses to