ROTOKING SA is a young business, established in 2003, with staff that has more than 25 years of combined experience in the rotomolding system for the transformation of plastics. ROTOKING SA has gradually become one of the leading references in quality and service, which are essential for the long-term success of the business in the rotomolding market.

As a result, one of ROTOKING SA's primary strategic goals is to offer competitively priced, high-quality products and services that meet our clients' needs. Our clients' satisfaction must give us references that open up new business opportunities as we work to consolidate our position in the rotomolding market. by supplying only high-quality goods

A family-run company, Inenplast SA, specialises in the injection and blowing of plastics.  

For this reason, both for our own use and to carry out specific developments in accordance with the demands of our clients, we develop and make the required dies for the injection and/or overlapping of products made of various types of plastics.  

We have the expertise, highly skilled staff, machinery, and equipment required to design, develop, and make products with high continuous production capacity and excellent quality.  

Our goal is to supply products to our customers that are high-quality, long-lasting, dependable, and functional. We do this by using the best raw materials, dependable methods, and effective controls.

It has been a company devoted to processing leftover plastic produced by industries and turning it back into raw material since 1969, helping to address environmental issues.

Our primary goal is to offer each of our products and services at the best price possible while maintaining excellent quality. 

We contributed to the development of recycling.

We are co-founders and members of the Board of Directors of FIPMA (Foundation of the Plastic Industry for the Preservation of the Environment), where we develop educational and enlightenment policies about one of the newest raw materials with the greatest potential for development. We are members of the Argentine Chamber of the Plastic Industry since 1975, of which we are a member of the Advisory Council.

The Madel Company was established in 1992 as a plastic and metalworking business, with a focus on the production of promotional items. With the passage of time, it has established itself as a supplier and has emerged as a leading company in the production of parts for the industry in a number of sectors, including POP Material (point of sale displays), Advertising, Hospital Equipment and Electromedicine, Signage, Urban Furniture, etc. strategy of a prestigious client portfolio, compliance, and service with comprehensive solutions catered to their requirements.

The ability to work at the cutting edge of technology is made possible by our ongoing investments in plant, machinery, and employee training. This enables us to live up to our promise to provide our clients with high-quality and profitable products.

We are a proudly Mexican business with over 20 years of expertise in the field, making us among the businesses with the most knowledge and recognition in the plastics market.

Our wealth of knowledge has enabled us to create projects of every description for various industries. Due to the extremely diverse range of clients we have worked with, we are highly competitive and provide only the highest-quality goods and services.

We work tirelessly to satisfy our clients, develop our employees, safeguard the environment, and—most importantly—live our beliefs every day.

One of the top producers of plastic injection molds and components for a variety of industries, including automotive, textile, electrical, defense, aviation, electronic, machinery, computer, and household parts, TOOLING TEMPLE was established in Coimbatore in 1992. Our strength is our in-house production, manufacturing, and subassembly facility. Precision plastic injection moulds and components are created by our team of trained and experienced designers, engineers, and technicians. To achieve 100% client satisfaction, a strong quality assurance staff monitors quality in all areas.

Nylon6, Nylon6.6, Polycarbonate, POM, Norayl, ABS, PP, HDPE, GPPS, glass and fiber filled materials and all grades are among the materials we have experience molding.

Our services include designing molds, manufacturing plastic injection molds, prototyping for samples, and plastic injection.

The American company Plastics Engineering Company, better known by its trade name "Plenco," has a longstanding reputation as a global pioneer in the research and production of phenolic thermoset resins and molding materials.

In addition to producing resin and compounds, Plastics Engineering Corporation ran a sizable thermoset plastics molding business in the United States for more than 70 years, meeting all the needs of the local industry for thermoset components.

A new thermoset plastic molding factory was opened by Plastics Engineering Corporation in Querétaro, Mexico, in 1999. Plenco de México, a new company, was established in direct response to the needs expressed by material clients operating in Mexico and to the expanding need for thermoset molding of plastics.

Your objective is to identify the plastic production option that is best for your project. As a result, this became the passion of our skilled technical professionals and designers. We have a combined 30 years of experience in the plastic injection molding and tooling industries. You receive professional advice on your part from our team of engineers. All the way from design and manufactureability through flow analysis. It's nothing new for us to mold your pieces and figure out ways to put them together, including doing comprehensive testing to verify quality!

With many of our partners, we have together set up injection molding and assembly processes with success. At the same time, we test and strengthen their current procedures. Our objective is to spread VEM's renowned quality throughout all continents. Besides

Sanjeev Soni founded Meenakshi Polymers Pvt. in 1989. Ltd. MPPL is a center for the production of a wide variety of goods for the home and car.

In order to provide its cherished clients with high-quality products, MPPL—which is run by three generations of business owners and employs more than 1000 qualified and dedicated individuals—combines world-class infrastructure, certified procedures, and cutting-edge technology.

Tkno has been specializing in plastic injection for 15 years, therefore we have a wealth of knowledge and can offer you a quick service.

We create push pins, levelers, knobs, plastic screws, regattas, rivet nuts, and other special parts.

Get in touch with us; we ship to the entire Mexican Republic.

Regency Plastics is a fantastic option for businesses that need high-quality plastic products as well as trustworthy guidance because our staff has many years of experience in the plastics manufacturing industry.

For your convenience, we maintain a wide range of products in store and specialise in supplying plastic sheets, rods, and tubes for a variety of applications. Additionally, we offer a variety of other goods, such as cutting boards, display boxes, and wear strips, as well as services like custom design and construct for companies looking for something special.

 .

Make no mistake, plastic fabrication is our obsession. Acrilix Plastics is pleased to provide clients all over Australia with a full range of plastic manufacturing services, but we definitely don't let our diversity compromise the calibre of our product. Every single one of our employees receives training on upholding the highest standards, guaranteeing that they can always count on our team.

Plastic manufacturing company Acrilix Plastics has been in business for more than 50 years. The business was founded in 1969 with the intention of offering dependable and reasonably priced plastic products to companies in Adelaide and across Australia. Since we have always designed and produced every item in our inventory, you can be confident that they are of the highest calibre. 

RetroFab Design & Manufacturing's owners have more than 70 years of combined expertise in the plastics industry, including plastic fabrication and signs.

We are glad to help you choose the right product that fits your budget or design. We serve the home handyman, local tradesmen, different industries, Government Departments and their subsidiaries, as well as bigger Corporate's.

We have experienced craftsmen from the past with new and creative concepts who can offer experience and solutions with:

Industrial Plastic Fabrication and Acrylic 

The best material for your endeavour.

assistance or consultation with engineering/specification details for large tasks.

product creation, product prototyping, and finding suppliers of finished goods.

ducting and fume evacuation system retrofitting.  

Contact us by phone or email, or stop by the workplace to have a conversation. or 

Australian Blowmoulding Corporation (abc) is a 100 percent Australian-owned business that has been a leader in the bespoke moulding of plastic bottles and closure mechanisms for more than three decades. With a specific emphasis on bottles with capacities ranging from 10 millilitres to three liters, ABC has established an enviable reputation for quality and service among the numerous sectors that depend on these products. ABC is a well-known manufacturing leader in the pharmaceutical and personal care sectors.

From our purpose-built manufacturing facility in Carrum Downs, Victoria, abc gets and utilises only the best blowmolding equipment available worldwide. Our high-end, European and Asian-made machinery includes blowmoulders (1, 2 & 4 cavity), injection moulders, and injection blow-moulding machines, all of which are calibrated to the same, exact production specifications.

The business Plas-Pak is proudly owned and run by Western Australians. We have been producing premium plastics out of our Perth plant since 1982.

We specialise in the production and distribution of rigid plastic packaging and engineered plastic parts, all of which completely adhere to the Hazard Analysis Critical Control Point (HACCP) certification regulations. Our product line provides services to numerous sectors, including the food, pharmaceutical, agri-chemical, and mining businesses.

Our usual packaging consists of: bottles, jars, shaker packs, jerry cans, and plastic.

We also offer all the necessary plastic pumps, sprayers, lids, and covers.

Our 4,500 square metre manufacturing plant in Perth offers full-service plastic packaging and injection moulding. Everything is included in this, from creation and design to production and dispatch.

Aluminum and plastic components are the areas of expertise for Rogers Industries Group. For the benefit of our customers, we can be at the forefront of manufacturing thanks to our distinct place across these two processes. We also use cutting-edge design and manufacturing technologies like CAD (Computer-Aided Design) and CAM. (Computer Aided Machining). These technologies enable us to offer our clients top-notch design, manufacturing, and technical solutions.

Colin Rogers, now 89 years old, established a modest engineering workshop in 1953 that provided fitting, turning, and engineering services. As a result of this company's tremendous success, Aquatic Engineering & Rogers Industries quickly gained a reputation as a manufacturer to be reckoned with. In the 1970s and 1980s, as the company expanded,  

  Mastroplas Plastics is an Australian-owned and -operated business that specialises in the creation of plastic injection-molded goods, including their design, tooling, and manufacturing.

As a full-service manufacturer of plastic injection molds, we are firmly prepared to help with any project from idea to product design, tooling, and manufacture.

At Corex, we consider creativity to be what distinguishes us. Because of this, we established a company with a specialised array of services in order to provide our clients looking for custom Australian-made plastic solutions with a one-stop store.

Industrial Plastics, which was founded in 1971, has expanded to become one of Australia's biggest bespoke plastic fabricators.

When we obtained ISO 9001 accreditation in 2008, it was recognised that we were dedicated to quality assurance. Customer satisfaction and the purchase of new equipment remain high priorities. Due to our success, the business is now able to operate in a variety of industries, including mining, food processing, marine, and water treatment.

The primary production facility and corporate headquarters of Industrial Plastics are located in Pinkenba, Brisbane. Design, engineering, and technical teams are on site to guarantee that the best product is created and given to our customers.