Guarni&Med is an Italian company founded in September 2009 that deals with the design, manufacture and distribution of gaskets for the medical and industrial sectors.

In February 2010 the company appeared on the national and international market, starting its production activity focused on molding, finishing, control and packaging of gaskets and technical articles in elastomeric materials, silicone and liquid silicone.

The experience of Guarni&Med together with its competence, reliability, quality and competitive prices are able to give support to the customer in every phase of the project.

The synergy between the operators of the different departments has implemented the range of gaskets and consequently the market opportunities. The process through which the operators participate directly in the performance of the company's activity is coordinated by the management group that outlines the objectives and distributes the resources so that the structure becomes a system that is not only active, but proactive.

The intranet system provides real-time data to all departments on the effectiveness and efficiency of business processes. At the center of these processes is the Customer, in the context of a continuous striving for continuous improvement. Through rules, procedures, instructions, human resources and technology Guarni&Med achieves the planned objectives and exceeds the customer's expectations, guaranteeing medical and industrial gaskets on time and with the desired quality.

Engineers, technicians and qualified operators always offer innovative and competent solutions and assist the customer even during the co-design phase, in order to find the best solution for each specific application.

In fact, Guarni&Med is able to offer its customers a consulting and assistance service both in the choice of material and regarding the production process, to try to eliminate or minimize any ecological and environmental problems deriving from the machinery (such as the dispersion of dust) and optimize the entire production chain avoiding hypothetical suspensions in the work due to it, for example, the cleaning of the machinery.

Continuous research in the field, investments, cutting-edge technology, human resources make Guarni&Med, today, a leading company in the sector.

Camberley Rubber Mouldings Ltd was formed in 1969 and operated from a modest facility in Camberley, Surrey. Founded by Mr Joe Griffiths Snr, an acknowledged leader in the industry during the 1950s.

Founded by Mr Joe Griffiths Snr, whose career included 15 years under contract to the Atomic Weapons Research Establishment (AWRE), working on projects such as “TSR2” and “Blue Streak”. To enable participation in these and other programmes he was security cleared to Top Secret Atomic level.

Camberley Rubber grew into its dominating position by working closely with emergent engineering and hi-tech industries offering otherwise unavailable solutions for rubber mouldings capable of meeting the stringent demands of modern technology. The company has continually expanded gaining recognition for producing high quality precision rubber mouldings in many varied industries including Aerospace, Electronics, Pharmaceutical, Industrial and Military to name but a few.

Camberley Rubber Mouldings moved to its current location; Unit 10 Springlakes Industrial Estate, Deadbrook Lane, Aldershot, GU12 4UH, in 1998. These premises provided us with a modern manufacturing facility with good national road and rail access for ease of logistics and this position allows us to capitalise on a solid delivery infrastructure.

We are in the midst of a thorough refurbishment programme of both outside landscaping and inside modernisation of the facilities and factory layout, affording our workforce and our customers the best possible experience when working for or with us.

Continued focus on technical excellence, efficiency, on time manufacturing and delivery and above all quality has meant that Camberley Rubber Mouldings consistently lends its name to the top of the list with companies requiring a professional organisation for the moulding of bespoke rubber components and parts.

We are a team of highly qualified people. For twenty years we have been producing elastomer components with a constant commitment to achieving the ambitious goals of our customers.

Offering a complete service, RO-RA Tech also offers design consulting services and technical design tests before the production of the molds.

Located in the Rubber Valley of Sebino, in the northern part of Italy, the Ro-Ra Tech facility houses the following services: warehouse for raw materials and molds,technical laboratories, molding department, post-polymerizationarea, quality control, sorting lines and logistics area for shipments.

Our company

High technology and human component: the perfect union.

Every day, in Lopigom we project and achieve o-rings, sealings and high quality technical articles with the keenest accuracy.

From 1979, in fact, we are in the national and international rubber and plastic market, providing articles in elastomer, thermoplastic and two-component for more of two hundred customers which work in following fields: automotive, household appliance, hydraulic, gas, pneumatic, electronic and medical.

We are aware of our key points, as the winning fusion between human resources, prepared and motivated, and forefronts technologies. All this to support totally the customer, providing him every moment a qualified and professional service.

RPM is a company that loves to see people succeed. Whether it’s with a standard rubber part or a custom piece, we care about the success of our product in your business. That’s why we’re always ready to take the time to understand your needs, find or develop the right part and then have it for you when you need it. We believe that component will, in its own way, make for a successful product or a smooth operation.

After all, it’s really all about smooth operation in the end. Maybe it’s by keeping a line running vibration-free, or making products last indefinitely because wear is prevented. Perhaps it’s by meeting production schedules because parts are there when you need them, or making your customers happy because your products are the perfect fit! RPM can help with all of that.

We know rubber. We care about people. It’s that combination of expertise and empathy that allows us to guarantee a perfect fit. We know rubber isn’t going to be the sole reason behind any one customer’s success (usually), but we also know we do have an important role to play in getting them there. Our part is supplying knowledge and parts that won’t let you down. We’re ready to do our part.

Stephens Gaskets Limited provides a comprehensive range of pressed parts with the resources detailed on this site. We are able to provide a complete shim manufacturing service to a wide range of industrial markets. We have been manufacturing Gaskets and Ring Shims since the company was established in 1947.

Stephens Plastic Mouldings is part of the Stephen Group enterprise. Initially, it was set up as a result of sister company, Stephens Gaskets, buying in plastic shim – which is a plastic moulding. Subsequently, it was decided ‘why buy it when you can make it’. As a result, Stephens Plastic Mouldings was born.

J. F. Rubber Phils., Inc. manufactures rubber parts for the automotive and electronic industries. The company also produces and supplies rubber compound to other companies. Its factory is located at Block 2, Lot 6 of the People's Technology Complex - Special Economic Zone in Carmona, Cavite, Philippines.

The company was established last 17 January 1992 under its previous name - JP-Aoki Rubber Philippines, Inc. It is a joint venture project of Filipino and Japanese Stockholders. It was also in 1992 when factory construction started and two pioneer employees were sent to Akita, Japan for training. Factory construction was completed on April 1993. At the same time, the machineries and equipment for manufacturing arrived and were installed. The first batch of production employees were trained and initial production and testing of rubber parts were made on May 1993. The factory's commercial operation started 7 July 1993.

The E&C Industrial Rubber Products is committed to become a leading reliable and affordable source of rubber products that contributes excellence standards. Being part and son-in-law of the owner of the company that produced rubber molded products in more than a decades, E&C Industrial Rubber Products was established.

 With the help of our God, the creator, that gives us knowledge, courage and determination to produce and fabricate different kinds of rubber molded products, and through experience as a chemist. We decided to build it in our own with a goal to provide and to supply rubber products that suit customer’s need based on their demand.

 E&C INDUSTRIAL RUBBER PRODUCTS put all the effort in the improvement of our products and services continuously. It will also help us in achieving our goals, and one of our goal is to maintain professional relationship to our clients.

 Again E&C INDUSTRIAL RUBBER PRODUCTS is very thankful for giving us opportunity to be your leading supplier and manufacture of rubber products in the Philippines. We are doing our best to gain your trust and looking forward to working closely with your good company.

Crystal Rubber are the UKs leading name for the supply of industrial hoses, couplings and gaskets together with a wide range of rubber and plastic products.

The service provided by the company also includes the manufacture of Koolshield insulated doors and PVC Door Strip Curtains, which are our core business areas.

The company's joint partners have a combined experience of over 30 years in the rubber and plastic industry and have ideally located the business in the heart of Cheshire in order to provide an effective and efficient service to the surrounding industries.

The company also offers a 24 hour response service together with nationwide next day delivery of its PVC strip curtains. These curtains are manufactured to fit your specific requirements, and are easy to install and maintain. Our PVC strip curtains are also easy to repair if required.

The company objective is to maintain quality management systems which provide an assurance of a consistently high level of quality and customer satisfaction. Here at Crystal Rubber, we really go the extra mile to ensure a great experience for our customers.

So, whether you have a requirement for brush strip for doors, safety matting, inflatable seals or PVC strip curtains, Crystal Rubber are here to help.

Established in the year 1977, we Bright Indotech Pvt. Ltd. Formerly Known As Bright Industries, Bawana, are well organized Manufacturer, Exporter, Wholesaler, Trader, Retailer of a wide range of Rubber Products and also provides high grade products with OEM solutions to various companies. Our range is widely acclaimed for high tensile strength, wear & tear resistance, high adhesion, excellent binding capacity, long lasting and versatility. These are used by various industrial and commercial applications. The product range include Nitrile Spacer, Industrial Seals and Millable Polyrethane Wheels.

 We are backed by dedicated professionals who work efficiently to provide a quality range of rubber product along with customized solutions to our clients. With our professional approach, scheduled delivery and advanced technology, we have built a strong client base with clients from Gulf countries and several other nations. Apart from this, we have also been able to meet the bulk requirements of our clients and have enabled us to produce 8 lakhs of unit per month.

Under the guidance of our Mentor, Mr. Amit Kumar Yadav , we are consistently progressing in our domain area. Our transparent business dealing has helped us in gaining a commendable position in the international market.

Owing to our modern manufacturing unit and the usage of high end technology, KS Rubber Industries is involved in offering a comprehensive range of products that includes Rubber O Rings, SWR Rubber Rings, Rubber Grommets, Rubber Seals, Column Pipe Thread Protection Cap  and many more. We are considered as one of the reputed Manufacturers, Exporters and Suppliers of these products in India. Our precisely engineered range is manufactured using premium basic inputs and cutting-edge technology in order to assure durable finish and excellent performance. Apart from this, our products are available in varied dimensions, shapes and technical specifications as per the requirement of clients.  We can also offer customized range of products to our customers. 

Established in 1984, BS Elastomers has strived to become a UK Leading provider of manufactured rubber moulded, composite elastomer & bonded part solutions. With over 100 years combined experience in the rubber industry in our in-house UK team, we have the knowledge, expertise and experience to deliver your parts on time & to a high standard.

We believe in innovation, flexibility, teamwork and operating with integrity. We make sure that all our staff conduct themselves with these core values to deliver high quality solutions, bespoke or part of our core range. Working with customers in the Aerospace, Automotive, Military, Medical & Marine industries, we have developed an understanding of quality, cost & delivery that matches the needs of the customer.

In 2018, we became part of a group headed by Geometric Manufacturing, a diverse and innovative engineering business. We are continuing to invest in our team and our work by upgrading equipment and facilities that will take us into the next phase of our business. We aim to continue being the leading provider for elastomers and rubber solutions.

Surjeet Engineering Company (An ISO 9001-2000 Certified Co.), A Noida based company Started its journey in the year 1981, As the Manufacture and exporter of Heavy duty die cutting machine and paper Corrugation Machines with other allied machineries, Ever Since it's commencement, The company has been pioneering new ideas and redefining Die Cutting & paper Corrugating Technology to reach the zenith of success. Every individual in our teams is committed to quality and perfection. Through hard work and persistence the company has become synonymous with the creation of working solutions for virtually any cutting, creasing and embossing of different materials. The organization is reputed for its ethics, transparency, corporate culture and its growth

Indico Rubber company has been manufacturing a wide variety of rubber to various industries for more than 30 years. Using innovative techniques our experienced staff endeavour to create and modify products to your exact requirements. We offer a complete range of products including:

Rubber Fabrications

Rubber Core Sleeves

Specialist Mouldings

Extruded Profiles and Tubing

Rubber Bellows 

Hat Press Bags

Bellows Moulded and Fabricated

Hoses

Accumulator Bladders / Membranes

Fluoroelastomer Sleeves "B and GF"

Pinch Valves

Roller Covering

Moulded Products

Fluorocarbon Sleeves

Bespoke Mouldings

ELASTOMER RANGE

NR (Natural Rubber)

CR (Chloroprene)

EPDM (Ethylene propylene Diene Monomer)

HNBR (Hydrogenated Nitrile)

NBR (Nitrile)

Shot Blast Rubber

Silicone

Fluoroelastomer (B and GF)

Various Food Quality Rubbers (Naturals / Neoprene)

Rubberman Rubber and Plastics Ltd was established in November 2003 and in this time we have built up an excellent reputation with our customers for our first class service and custom made rubber or foam products to our customers specifications.

We are continually investing in machinery and thinking outside of the box in how we can make products that meet our customers needs and requirements.

With working with other companies with in our industry, we are able to produce or source a wide range of different materials and products for all uses.

We are able to make or supply foam and rubber in sheets or rolls with self adhesive backed or plain.

We can manufacture or supply rubber & foam washers, strips, gaskets, seals, extrusions and moldings to our customers specifications.

We also supply rubber matting in rolls or cut to our customers requirements.

Mackay Rubber (Thailand) is a supplier of engine hoses and rubber seals for the automotive and industrial markets.

Our commitment to uncompromising standards of excellence in all facets of production, has resulted in the successful penetration of new markets and sustained profitable growth.

Success in these chosen markets has been built on a simple philosophy - understanding our customers’ needs and providing timely, cost-effective engineered solutions. Our products are exported to many worldwide regions. Our technical expertise, customer-responsive service and commitment to continuous improvement, backed with sustained investment, will ensure Mackay’s reputation for reliable, high quality, innovative products will continue.

Technology and reliability today and tomorrow

Since 1966, IR has been the leading manufacturer in Thailand for high quality rubber parts to the automotive aftermarket.

We continue to strive to meet the need of the marketplace in today’s ever changing and ever-competitive environment, recognizing the many components to our continued success-quality products, premier service, competitive programs and unbeatable coverage.

IR continues to work diligently to expand our product line and coverage of engine mounts, transmission mount, strut mounts, center bearing supports, bushing, etc to include the parts you and your customers need. Our market research and forward looking development commitment insures that we have available today what you are going to need tomorrow.

With our centrally located and fully stocked warehouses, we recognize product availability and with short lead times delivery is of paramount importance in today’s market place.

While the market continues to provide you with many choices, you have our sincere and continued commitment to keep working towards growing the IR family of products.

BLP Rubber & Plastic Supplies are one of South Africa’s largest rubber & plastic moulders. Our main manufacturing centre is located at the Midlands Business Estate just off the R103 off – ramp from the N3.

Together with our local and international partners we provide our customers with the best technical advice and service . We have extensive trading ties with Large Middle East Corporations which allows BLP to import products and have tooling made for competitive prices without comprising quality.

Our Management team has more than 60 years experience in both the Rubber & Plastic fields

Madan electro an ISO 9001:2008 certified co. is one of the leading manufacturer of moulds, plastic and rubber components.It was established in 1992 by Mr Vinod kumar Gupta.Our aim is to manufacture high quality products while striving to provide hundred percent satisfaction to our customers.

Madan Electro manufactures electrical, electronics, and automotive plastic and rubber parts. In addition to these we are also involved in production of tools. We have injection moulding machines,semi machines, lathe machine, milling, surface grinding machines.