PCB design services and full electronic device development services are offered by 911EDA, Inc. Among our offerings are PCB design using all common software programmes.

Design and capture of schematics Reviews and audits of schematic and PCB designs.

fabrication and assembly of PCBs for library management

purchase of components

Designing hardware, software, and firmware is part of our engineering services. 

911EDA, Inc. has been sharing its vision with customers in the consumer electronics, industrial, medical, military, and telecommunications sectors since 2000. With offices in Boston and San Diego, we provide service for clients all throughout the United States.

CCM is a pioneer in offering cutting-edge manufacturing and design services for cable assemblies. Through the provision of the most comprehensive services possible in labor-intensive assembly and turnkey manufacturing, CCM focuses on developing long-term customer partnerships. Even while our comprehensive suite of services offers unmatched value to our clients, ultimately, what sets us apart in our sector is our company-wide dedication to client demands. Every customer connection requires flexibility, response, and accountability.

Cost competitiveness is required at CCM through the use of supply chain management. With our fully owned Manufacturing and Assembly Plant in San Marcos, California, and Corporate Headquarters there

We are uniquely positioned to offer direct sales, engineering, and purchasing support from our USA facilities while retaining our market-leading prices because of our location in Ensenada, Mexico.

Whether you need a single prototype or a full rollout of production, we can meet your needs.  We are a trusted go-to service provider because of our focus on quality and service.  In our business, the customer is always put first, and we work hard to go above and beyond their expectations.

We're eager to collaborate with you!

In order to reimagine the electronics production process, Milwaukee Electronics' Screaming Circuits subsidiary was established in 2003. Screaming Circuits makes PCB assembly individualised, quick, and flexible for prototype and on-demand production, in contrast to traditional manufacturing techniques that emphasise huge volumes and rigidity. We invented instantaneous online quoting and e-commerce manufacturing, and we're still leading the charge on creative approaches to simplify your experience with electronics manufacturing.

Modern production doesn't revolve upon spectacular sales. It's about creating sincere, dependable one-on-one relationships.

With an exceptional cost-performance ratio, we provide your items when you need them and in accordance with your specifications. Our emphasis on individualized customer service enables us to effectively and reliably ensure a high degree of quality. To continuously cut down on customer lead times and eliminate superfluous inventory, REYcomp uses pull systems, single-piece flows, standardized work, and cellular production techniques.

Why is the process of making electronics so outmoded, challenging, and cumbersome? We experienced these challenges first-hand while employed in the consumer electronics industry. By creating a software-driven methodology to facilitate the introduction of new electronic devices to market quicker and simpler than before, our co-founders aimed to reinvent the contract manufacturing sector.

10,000 square foot manufacturing facility in Southeast Albuquerque, New Mexico. 1980

specializing in the production of high-quality

PCB prototypes and limited manufacturing runs

Turnaround time of 48 to 72 hours

design accessible

As a division of Northern Apex Corporation (Incorporated in 1994), API Alliance - "Partners In Design and Production" was established in 2008. Initially, Northern Apex was a contract assembly facility for electronic and electro-mechanical components.

Within Northern Apex, a separate division was established in 2000 with the goal of pursuing, developing, and integrating RFID technologies. Success in integrating Northern Apex-RFID products and solutions can be attributed to the skilled assembly team, competent engineering design team, and innovative software integration. Northern Apex - Electronics and Electro-Mechanical Assembly split off from Northern Apex Corporation in January 2008 and rebranded as API Alliance, Inc. This branch was established to give our various operations more "internal" clarity. All of the Adaptek firms, including Automated Laser, and API Alliance continue to collaborate closely.

Made Cascade is a one-stop shop for design and production that can be utilized in a wide range of fields.

We are a design studio that incorporates prototyping and production, transforming concepts into final products that are prepared for production or fielding. In a variety of industries, including consumer goods, appliances, automotive and marine, industrial equipment, factory automation, food service, and others, we work with a range of clients, including entrepreneurs as well as small and large businesses. 

In addition to acting as a manufacturing vendor for prototyping and small/medium production of parts and assemblies, we operate as a design contractor giving CAD services, engineering assistance, and manufacturing consultancy. We concurrently and continuously do both design and manufacturing tasks, which enables us to iterate and revise prototypes at a competitive pace as we

being a premier manufacturer and designer of rigid and flexible printed circuit boards. By offering dependable service and high-quality goods, forging long-term relationships with our clients, partners, and team members, as well as by continuing to be a good neighbour, we will be successful.

Since its founding, DCA Manufacturing has focused on building connections with customers, providing high-quality goods and services, and being straightforward to do business with. This company only makes custom electronic and electromechanical assemblies.

In September 2019, Troy, Michigan-based Debron Industrial Electronics and DCA Manufacturing amalgamated. The capacity of DCA Manufacturing was increased as a result of the acquisition, and our business now has access to Michigan's IATF16949 automotive certification. We've used this combination to our advantage to give our clients better quality, shorter lead times, and even more electronic and electromechanical know-how.

Now everywhere "DCA" refers to Debron Circuit Assembly. Regardless of location, the distinctive approach we apply to each of our customers' electronic manufacturing demands is highlighted by our name and corporate principles. In a field where quality is valued 

RPI is a provider of Contract Manufacturing (CM) Services, Cable Design & Maintenance Services, and Production Test Automation Solutions. It was established in 1986 and is based in Racine, Wisconsin. Our 25,000 square foot facility, together with our committed personnel, is here to ensure that our work meets your standards. With our fully equipped machine shop, automated PCB assembly line, and short lead times, we continue to provide the high quality, quick turnaround, and affordable structures that our clients require.  RPI has long served the commercial, automotive, rail, and green energy markets and holds a number of patents in the fields of automation and high-power signal delivery.

Please email the following information to us at quote@automated-assembly.com in order to receive a quote for your PCB assembly project.

The Gerber files necessary to create the PCB and any relevant PCB manufacturing notes

The list of materials (*.xlsx spreadsheet or *.txt file with tab delimiters.  View the notes below.)

The PCB's pick-and-place data file(s), if any

Notes on PCB assembly, if any

Whether the circuit boards are tin/lead or RoHS compliant (lead-free).

The desired quantity of finished PCB assemblies

The preferred date for delivery

Your contact details, such as your phone number and email address

The following information should be included in the Bill of Materials file:

Each part's customer part number (not necessary, but highly frequent).   

Electronics industry clients can obtain contract manufacturing services from Shore Printed Circuits, Inc.

With nearly 50 years in the business, we have the expertise to provide high-quality products at some of the most aggressive pricing available.

Without having to invest in expensive equipment and process knowledge for electronic assembly, our aim is to function as an extension of your business.

 With over 40 years of engineering and software experience, CTI-Tronics, Inc. is a privately held New Jersey business that specialises in electronics for the education, life sciences, and medical device industries.

We produce electronic prototypes and mass quantities for Internet of Things (IoT), medical, life science, and home service products.

MetaliCom LLC is a top business that specialises in turn-key projects for specially made, rugged military and defence products that adhere to MIL-STD 810 military environmental standards.

In Eatontown, New Jersey, MetaliCom has a 5,000 square foot integration assembly and testing facility that has been completely accredited by ISO 9001-2015 for the past 20 years.

In order to assist with agency acquisition missions, MetaliCom, LLC is registered in the CCR (Central Contractor Registration) for the U.S. Federal Government.

Our DUNS number is 80-746-7373 and our Federal Cage Code is 56P21.

We are honoured to work with USA Homeland security firms such as 3M, GOI-MOD, IDF, IAI, ELTA, ENA-ELTA North America, TAMAM, Elbit, Elbit North America, Ashot Ashkelon, ELOP, and others.

A group of experts in electro-design. Our primary goals are to fulfil your demands and exceed your expectations. Depending on your demands, we can manage your projects from design to completion or just concentrate on PCB layout, fabrication, or manufacturing. We have "Top Gun" winners on our team of layout experts, as well as IPC CIDs (Certified Interconnect Designers). Browse our website at your leisure. For further information or to get a quote, get in touch with us. 

Spinnaker Contract Manufacturing will complete your project correctly the first time because of its more than 30 years of experience in electronic manufacturing services. We collaborate with a wide range of clients on tasks that include material sourcing, the creation of cables and wire harnesses, the populating of printed circuit boards, complete electromechanical assemblies, and box construction. Our skilled team provides complete support for every phase of a project's development, from the prototype to full production.

The creators of IMS understood the challenges organisations encounter in obtaining excellent customer support for their prototype and low-volume PCBA requirements and created IMS particularly to fill this market gap.

The IMS management team has been together for more than 25 years and has a wealth of experience in the EMS sector. We recognise and comprehend the design and production issues that your company is facing, and we are prepared to assist.

The values of cooperation and responsiveness are key to the IMS culture. We adhere to schedules, fulfil deadlines, and understand the value of following through on our commitments. It is a life of perseverance, hard work, and dedication. We have your success in mind, and we take pride in the part we play in it.

PICA Manufacturing Solutions has the capacity to make flex pcb, stiff flexible circuits, printed circuit boards, flat flexible cables, and flexible heaters in small and large production runs with annual outputs surpassing a million units. We are confident in our abilities to make the greatest goods on the market because we have been in business for more than 22 years, have more than 30 years of expertise, and have produced millions of circuits and other applications.