Century Mold does more than just mould parts; our customers come to us with their most difficult tasks... and we mould solutions. The automotive business is full of challenges, and we take pride in our ability to solve them. We are available to assist you today, with over fifty engineers on staff and production facilities to match.

ISOCO is a full-service provider of plastic parts, tools, and the production of glass fibre reinforced plastic components with polyester resins and injection moulded parts on 30 machines with clamping pressures ranging from 40 to 2300 tonnes.

We manufacture at competitive rates in the heart of Germany. We provide a wide variety of products, particularly for the logistics, automotive, and construction sectors.

We are the injection moulding experts for the creation and production of special containers and pallets.

More than 100 highly specialised employees have been with the business for up to 35 years, allowing them to hone their skills in toolmaking, plastic lamination, and injection moulding.

Are you searching for low-cost solutions for your plastic products that are of high German quality?

WEHA Plastic GmbH, as a certified injection moulding business, stands for competent support: from precise analysis to consultation to proper production execution. We achieve the highest quality standards by combining precise planning with cutting-edge technology.

We will gladly counsel you on the implementation of your innovative ideas and persuade you with new forms and cutting-edge materials that meet all requirements such as environmental friendliness, sustainability, and extreme stress. We have our own tool shop and can provide you with all services from a singular location. This simplifies your purchasing and eliminates complications during transaction processing.   50 years.

Molytex A/S was established in 1965 by M.Sc. Jrgen Matzau at Smedeland 12 in Glostrup, Denmark. (1938-1995).

The initial company concept was to sell and finish thermoplastic profiles and sheets. Later on, the company expanded into injection moulding techniques.

Molytex A/S is now a leading injection moulding business specialising in the production of industrial thermoplastic components for major European corporations.

We employ cutting-edge injection moulding tools and technologies.Our production is extremely automated and meets today's industrial standards.

​

Nam Rong Industrial Co., Ltd was established on October 28, 2002, and is a manufacturer of high-quality plastic items used in medical equipment, motorcycle and automobile parts, home products, and industrial components.

May 2006 saw ISO 9001-2000 certification.

2009 saw an update to ISO 9001-2008.

upgraded to ISO 9001-2015 version in 2015.

Move to the Ho Nai Industrial Zone in Trang Bom in December 2010.

Nam Rong has made a name for itself as

Following "Sharing Profit, Sharing Value" and "Creation, Quality, Service"

To attain the goal of sustainable development, advanced technology, automated production, and high efficiency, high quality, and low cost products should be pursued.

When home appliances reach 30% in the European region and 20% in the United States, the export market is also very broad and diverse.

Heinz Spath and Andre Theron, toolmakers, founded Pencar Manufacturers in 1979. Pencar was founded on the design and manufacture of a broad range of toolmaking for various products. Pencar entered the manufacturing field after an opportunity for "concept to completion" of products emerged.

At FS Engineering and Plastics, we're introducing breakthroughs and rewriting how the plastics business is viewed globally.

We've been pushing the limits in polymers, accuracy, performance, and people since 1982. Because our best-in-class industrial clients demand and expect perfection.

Our dedication to quality has enabled us to develop into a renowned and dependable leader in the production of plastic goods on a global scale.

As an addition to existing operations, we collaborate with manufacturers and business owners to offer contract manufacturing services. This will free up our partners' resources to concentrate on their core competences while giving Uniplast Ltd. the chance to offer significant cost reductions based on our well-established expertise in the plastic processing sector. Since its establishment, Uniplast has collaborated with a large number of companies operating in a wide range of sectors, including the automotive, food packaging, medical, and toy industries.

Our key expertise in the plastic processing sector is based on our highly qualified people and technologically advanced equipment that enable us to achieve lean integrated solutions that are both affordable and uphold the highest quality standards.

The strength of Uniplast Ltd. is in the vertical integration

A Maltese-registered company with more than 45 years of experience in the plastic processing sector is FARMA Plastics Limited. On February 28, 2003, Farma Plastics Limited was officially established in Malta.

Consiglio Farrugia, the chairman of the company, brought to Malta the knowledge, tools, and experience he had acquired over many years in the plastics manufacturing sector in the United States. FARMA Plastics Limited was founded by Consiglio Farrugia and Mario Mamo, the former production and subcontracting manager of Toly Products Limited. Mario Mamo, who is currently the company's managing director, has more than 25 years of professional expertise.

Farma Plastics is supported by cutting-edge technology, cutting-edge machinery, and equipment. Farma Plastics is a pioneer in the industry thanks to the capability and adaptability of this equipment.

Daneo Tooling has a network of local and global toolmaking partners, so we can either manufacture or project manage your tooling locally, based on your needs. This enables the production of numerous moulds at the same time, allowing your finished product to reach the market on time.

In order to retain and enhance the number of Danish jobs as well as provide more opportunities for Danish businesses to thrive, we are a part of a project that requires smaller businesses to become more visible to potential clients.

We have a modern, 700 square meter cleanroom as well as an ultra-modern, 800 square meter production area that is crammed with cutting-edge robotics.

In both production sectors, the lean idea has been introduced.

Since its founding in 1979, Bogense Plast A/S has experienced tremendous growth and is now regarded as one of the nation's leading independent plastics industries. Bogense Plast has 100 employees that work on producing high-quality plastic products, ranging from machine parts to well-known design items. New technology, order, and systematics define production.

SinCo Technologies, established in 1995, is a premier integrated precision manufacturer of plastics, rubber, and silicone engineering components. SinCo Technologies offers a wide range of products and services in the following industries: communication networks, computing and storage, multimedia, industrial and semiconductor capital equipment, defence and aerospace, medical, clean technology (CleanTech), and automotive.

This last point is a testament to the extensive certifications SinCo has obtained throughout its decades of operations. SinCo's 5000-strong team, spread across 6 countries, is led by an experienced management team drawn from some of the most highly competitive engineering sectors.

Our 1946-founded tool factory, one of the biggest and oldest in Northern Europe, employs about 65 people.

Denmark's top tools

The majority of the tools we manufacture are technically challenging, through-hardened, extremely strong tools of the highest caliber with low tolerances and tailored quick cycle times for good moulding economy and parts of the highest caliber.

One new injection molding tool is produced at Hjerno Tool Factory every day on average, and we constantly have 30-45 new tools in production, so even though the tools are typically unique, we have a lot of tool parts that are interchangeable, which has a significant positive impact on production and lowers the cost of the tool parts.

Your primary partner for design and production in Asia is Watson EP. We offer creative, dependable, and affordable solutions to satisfy your requirements for high-quality consumer and industrial products. Watson is able to provide vertically integrated production services from Product Development to Complete Assembled Products thanks to its manufacturing facilities spread out across Asia.

We have more than 40 years of experience in the industry, and Watson EP, which was founded in 1977, offers ODM and OEM contract manufacturing services for Pro-Audio, hygiene products, and a variety of plastic goods. In order to give you complete support, we currently have a vital pool of highly qualified engineers and a skilled workforce, backed by extensive design and production facilities in Singapore and China.

A wide variety of highly precise instruments and intricate injection moulded components are available from Pearl Engineered Solutions. The companies that make up Pearl Engineered Solutions, Ying Shing Enterprises and Fischer Tech, have been dependable and cooperative partners for top product manufacturers in the industrial, automotive, healthcare, and industrial sectors for more than 20 years.

Proprietary tooling design, superior systems engineering, and our unwavering dedication to customer success across Asia, North America, and Europe are the main drivers of our competitive edge. Our ability to perform secondary finishing in-house and completely automated assembly systems enable us to provide end-to-end solutions that meet more stringent standards for tight tolerances and higher specifications. The transition from product development to complete production is made easier by our reliable, tested new product introduction method, which also provides proven delivery performance.

Since our company, AMP A/S, was established in 1991, we have developed useful methods and setups for producing injection-molded plastic parts, which are mostly employed in the medical device business. Because of our membership in the Rego Silicones Group, we are now in the same group as one of the top mold manufacturing companies, Regoform A/S. Being a part of the same group has allowed us to expand our knowledge and expertise of component and mould constructions, which has been very advantageous for customers of AMP A/S.

For more than 25 a long time Provision Plastics has gotten to be a pioneer in plastics infusion molding and a favored provider for a few of the foremost effective companies in North America.

Our administrations incorporate custom infusion molding, instrument plan and creation, value-added operations and gathering.

Our fabricating locales in Mexico are based within the North and Central portion of the nation close to the foremost vital Mechanical districts (Monterrey and Queretaro).

US Deals, Building and Extend Administration for US clients are overseen in our San Antonio, TX office.

Established on keenness and stric moral hones, looks for mutially advantageous connections with clients and providers that share a like vision on economical trade.

At EVCO Plastics, we’re rewriting the way injection-molded plastics is done.

Since 1964, we’ve been pushing the boundaries—in plastics, precision, performance and people. Because perfection is what our best-in-class manufacturing clients need and expect. Our commitment to excellence has helped EVCO grow into a globally recognized and trusted leader in injection molding. To be the source for Where Innovation Takes Shape, we take on challenges, test hypotheses, and collaborate with the top engineers in the world. Also, we have remained firm in our commitment to client service throughout the past five decades, safeguarding cost effectiveness and profitability on every project.

Established in 1988, MAP Plastics Pte Ltd is a well-known one-stop manufacturer of high-precision tools and injection moulded plastic components in the MedTech industry. Our clients in Singapore and other ASEAN countries attest to our trusted and reliable solutions that led us to have strong foothold in the country’s MedTech supply chain. With our aspirations to expand operations to the States and Europe, we set out on another fruitful adventure as we approach nearly 30 years of practice in the sector.