Texcel Technology Plc has been established for 40 years. Initially the company specialised in the design and manufacture of electronic ship loading computers. The original management team of William Bryce and Ken Luscombe had many years' experience working with this equipment. The company then grew into contract electronic manufacturing. The company stopped manufacturing loading computers but continued the Electronic Manufacturing Services (EMS), coupled with system and circuit design.

We serve world-class customers in high-reliability industries by providing electronics design and manufacturing solutions in both printed circuit board assembly (PCBA) and full box-build manufacturing.

McLaren Plastics was spun out of the family plumbing business in 1960 to manufacture a new type of snap-action plastic pipe clip – the Maclow Clip – developed by George McLaren. This is a product range we still sell today and the business is now under the stewardship of the second and third generations of McLarens.

Ever since Newton was founded, we have continuously worked to improve our technical skills with such spirit. Our spirit and dedication to improve have lead to production of high quality goods, satisfying not only our valued customers, but also our local and global society.

At TRAVIN, we manufacture quality plastic moulds and mouldings. We have our own in house tool room producing moulds which run in our own fully automatic modern moulding shop supplying a vast range of companies worldwide for over 45 years.

Amaero International Limited ASX:3DA was established in 2013, to commercialize additive manufacturing of metals and alloys technologies developed by Monash University, we service customers in the aviation, aerospace, defense, automotive and tooling markets.

Alternative Engineering is a leading Melbourne based engineering service and manufacturing company that specialise in high-capacity production environments across a wide range of industries, with particular expertise in the Food & Beverage sector. No matter what the question or the challenge, our team of design engineers and project engineers have the knowledge, expertise, and skills to provide sound advice, recommendations, and innovative solutions.

With an impressive and growing client list, Alternative Engineering has built a reputation for exceptional customer service, technical expertise, reliability and quality engineering outcomes.

Total Tooling Co. Pty. Ltd. was established in 1983 and has been servicing Australian and global manufacturing needs for over 30 years. Based in Victoria, the company is three factories large, employ over 80 people and have amassed a collection of machines which are capable of supporting production and prototyping needs of various scales. We pride ourselves on stringent quality and customer satisfaction.

Total Tooling has consistently continued to grow its client network and has expanded in acquiring and servicing MDK Toolmakers and TJ Carey parts and services.

Established in 1996, Atlas Tooling is a professional and high-quality Tool and Die manufacturer, and quick-turn manufacturing company in Victoria. We provide Tool and Die making, service and repair, CNC machining, spark EDM services, CMM Inspection & metrology services and project management.

Atlas Tooling customers represent the full spectrum of industries – automotive, engineering, food, marine, medical, mining, security, white goods and others.

Our professional work force, with strong engineering backgrounds and rich project management experiences deeply understand customers’ needs, provide professional DFM analysis and customer-oriented manufacturing solutions, for the best approach of custom parts manufacturing. Our instant response and professional manufacturing guide help our customers saving time and cost in product development.

Atlas Tooling also has partnerships with specialist suppliers in South Korea, Malaysia and China. 

Insight Engineering is a Geelong-based automation and electrical engineering drafting and design firm servicing clients locally, nationally and internationally. Our team of highly motivated professionals specialises in all areas of electrical engineering and design. Insight Engineering has been delivering quality systems since 1989 and we have worked with a diverse range of industry sectors both domestically and internationally, from refrigeration through to automotive manufacturing.

Along with our engineering skills, Insight Engineering has a strong understanding of the electrical industry through experience in electrical engineering design services, installation, commissioning and maintenance. We provide a wide range of electrical engineering services including PLC systems development, SCADA and HMI systems development, RTU and telemetry systems development and MES system development.

Insight Engineering also provides support and expert advisory and training services including construction and installation supervision, plant commissioning and operator training, ongoing engineering (support and design), energy and building assessments, safety systems and automation training.

At Insight Engineering, we aim to achieve electrical engineering outcomes in partnership with our clients. We are a client-focused firm, born out of integrating specialised electrical engineering with existing business to create innovative solutions.

We pride ourselves on understanding our clients’ needs and providing the best possible advice on the most efficient way to tackle an electrical project. Insight Engineering employs the best people in the industry to provide the skills and knowledge required to deliver the best electrical engineering services, advice, training, assessments and support.

KORCHAROEN KARNCHANG was established in 1998 aiming at satisfying the customers in transformed steel industrial in Thailand. Our service included tooling design according to the engineering or samples required by customer.

Yawata Neji takes on the functions of the "quality assurance department" and "manufacturing control department" of overseas manufacturers, delivering products with the quality level demanded by the industry at low cost. Utilizing our overseas networks in China, Thailand, and Indonesia, as well as our domestic network, we fully support the procurement of our global customers.

Tex Plastics Ltd Barnstaple and Tex Plastics Ltd Derby enjoy the benefits of shared expertise, buying power and all the support of each sister company, although both companies operate as independent profit centres to ensure they remain highly competitive.

The two production facilities have developed a common internal management process – FOCUS – to ensure that Tex Plastics clients get the best solution for their requirements. This includes established overseas alliances with preferred partners in the UK, China and Europe for both new tooling and Injection Moulding to offer the best fit for a clients needs.

The attention to the market has led IPM to invest in technology (gas-assisted molding, bi-component) to address the multiple and growing problems (technical and / or economic needs), capable of external collaborations that implement its know-how and allow you to create reliable and customized solutions for the satisfaction of your customer.

Thanks to our familiar and at the same time managerial structure, we can guarantee a long-term strategy, based on consolidated and proactive relationships, both among our collaborators and above all with our Customers. For our employees, customer satisfaction is a central element of our corporate commitment.

Along with providing safe, high-quality products to customers,a stable life and hope to employees, and
appropriate dividends to shareholders,we will actively contribute to the development of society with a spirit of coexistence and co-prosperity with cooperating companies.

The components of the company come from a solid family tradition that began in 1980 with a mechanical equipment consisting of machine tools, equipment for the construction of molds for injection molding and two presses for testing and molding small quantities of technical items third parties.

With the passing of the years, the events and the changing needs of the market, the company has specialized only in the molding of plastic materials with a small department for the ordinary maintenance of the molds, in order to reduce costs and production times.

Today the qualitative characteristics and the desire to do lead to a continuous strengthening and updating of the structures, systems and staff, and it is with this in mind that a new office has been inaugurated in Locate Varesino (CO).

With the "distribution business" as the core of our business, we are highly evaluated as a "proposal-type technology trading company" that focuses on developing original products that meet the needs of users together with manufacturers in Japan and overseas. It is a Thai subsidiary of a trading company.